1)
Message boards :
Problems and Help :
Suddenly "error while computing"
(Message 131545)
Posted 1403 days ago by AT Hiker
Poking around in the system I found that card 0 was not running at all, so I restarted the system and it now seems stable for GFN 15 on both cards.
Perhaps one card not working caused the other to fail calculations although that is beyond my understanding as to why it would.
I don't OC but took a measured approach and turned down the voltage and clock on card 0. Card 0 being on the top always runs hotter but below the point that it should matter.
If the system continues to run reliably I will attempt a GFN 16 and then GFN 17.
AT Hiker
|
2)
Message boards :
Problems and Help :
Suddenly "error while computing"
(Message 131540)
Posted 1403 days ago by AT Hiker
After running PPS Sieve and AP 27 for many wus with rarely ever having an error I switched last night and started running GFN 15, 16 and 17 low.
All 28 wus failed.
My desktop is running Win 7 and has dual GeForce GTX 970 cards.
The only recent change made was an update to driver 26.21.14.3064 on May 5 2019.
Help please.
AT Hiker
|
3)
Message boards :
Problems and Help :
Exportation of stats
(Message 130413)
Posted 1448 days ago by AT Hiker
Does PG automatically allow the exportation of user stats or do I need to opt in?
AT Hiker
|
4)
Message boards :
Problems and Help :
Nvidia GeFore GTX970
(Message 129657)
Posted 1473 days ago by AT Hiker
Everything working well. Can't say anything is faster but I will know over time.
Thanks again to all.
AT Hiker
|
5)
Message boards :
Problems and Help :
Nvidia GeFore GTX970
(Message 129575)
Posted 1476 days ago by AT Hiker
Michael,
Thank you very much. I remember some problems with some drivers on PG so I never considered updating the drivers. Sort of "if it ain't broke don't fix it mentality".
Be well!
|
6)
Message boards :
Problems and Help :
Nvidia GeFore GTX970
(Message 129570)
Posted 1476 days ago by AT Hiker
Does anyone know if the above card will handle OpenCL 1.2.
If so what driver is being used and will that driver work on Prime Grid?
I need 1.2 for something else and don't want to have problems running Prime Grid.
Obviously I know almost nothing about the workings of the computer. I just use the thing.
Thanks for any help.
AT Hiker
|
7)
Message boards :
General discussion :
Cross projects link
(Message 128319)
Posted 1529 days ago by AT Hiker
Yes I did change my email address recently so that is probably the problem.
So I guess I need to change my email address on every project I have ever run. Now I need to figure out what projects I have run.
Thanks to all for replies.
|
8)
Message boards :
General discussion :
Cross projects link
(Message 128313)
Posted 1530 days ago by AT Hiker
I am uncertain what you mean by "no links". Are saying that on the other Projects you have run, the cross project links don't report all your Cobblestones of computation and number of floating-point operations but just the numbers for that project?
I know that in Amicable Numbers the cross project link never reported anything but Amicable Numbers work. I reported that in the discussion group but no one was interested in fixing that.
I just looked at the Amicable Numbers cross link for my account and everything is zeroed out.
But as I stated before PG always reported all of my Projects. I am certain because each day I entered the values in a spreadsheet.
Perhaps there is a BOINC problem.
Thanks for taking time to check and post.
|
9)
Message boards :
General discussion :
Cross projects link
(Message 128301)
Posted 1530 days ago by AT Hiker
Are all projects listed when you go to the link?
They have been in the past but not in the last few days.
|
10)
Message boards :
General discussion :
Cross projects link
(Message 128295)
Posted 1530 days ago by AT Hiker
This one
http://www.primegrid.com/cert_all.php
Your Account
Certificate
Cross project
Does that help?
|
