| Author |
Message |
|---|
 RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
                    
|
|
GFN262144 - "Bach Festival Challenge" - 13-22 June
Announced is a nine day GFN262144 (Generalized Fermat Number Prime Search N=262144) challenge from 13th until 22nd of June. I suggest we start at 12:00 UTC and end at 12:00 UTC.
Bach Festivals are classical music festivals held to celebrate the memory of the German composer Johann Sebastian Bach. Various locations throughout the world hold a festival dedicated to Bach. Notable Bach Festivals include Baldwin Wallace University in Berea, Ohio, put on by the Baldwin Wallace Conservatory of Music. The Bach Festival Society of Winter Park in Winter Park, Florida, and the Bachfest Bolivia, celebrated yearly in Cochabamba.
More about the Generalized Fermat Number Search can be found here. News and infos about the PRPNet client can be found here.
To take part, you have to activate the following lines in prpclient.ini:
server=GFN262144:100:1:prpnet.primegrid.com:11002
Stats will be available 15 minutes after the start at the well known place here.
All previous PRPNet challenge stats can be found here.
Good luck!
____________
 |
|
|
|
|
|
Can this challenge be run on a GPU?
____________
|
|
|
Sysadm@Nbg Volunteer moderator
Volunteer tester
Project scientist
Send message
Joined: 5 Feb 08
Posts: 1188
ID: 18646
Credit: 490,016,651
RAC: 0
                  
|
|
Yes
there is a ocl and a cuda app
I did some workunits the last days with the ocl app on my nvidia gpu
____________
Sysadm@Nbg
my current lucky number: 3749*2^1555697+1
PSA-PRPNet-Stats-URL: http://u-g-f.de/PRPNet/
 |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
Yes
there is a ocl and a cuda app
I did some workunits the last days with the ocl app on my nvidia gpu
"B" limit for GeneferOCL for GFN262144 should be about 1,015,000.
How can it have run without Maxerr? If it worked can you run ">geneferocl.exe -l" and post the results? |
|
|
Sysadm@NbgVolunteer moderator
Volunteer tester
Project scientist
Send message
Joined: 5 Feb 08
Posts: 1188
ID: 18646
Credit: 490,016,651
RAC: 0
|
|
OS is a Linux 64-bit system
[2014-06-13 10:09:55 CEST] GFN262144: PRPNet server is version 5.3.0
Hi! Welcome to PrimeGrid's GFN 262144 Prime Search.
geneferocl 3.2.1-0 (Linux/OpenCL/64-bit)
Copyright 2001-2014, Yves Gallot
Copyright 2009, Mark Rodenkirch, David Underbakke
Copyright 2010-2012, Shoichiro Yamada, Ken Brazier
Copyright 2011-2014, Iain Bethune, Michael Goetz, Ronald Schneider
Command line: ./geneferocl work_GFN262144.in
Running on platform 'NVIDIA CUDA', device 'GeForce GTX 550 Ti', version 'OpenCL 1.1 CUDA' and driver '304.116'.
Start test of file 'work_GFN262144.in' - 10:09:55
Testing 1053226^262144+1...
Using OCL transform
Starting initialization...
Initialization complete (1.088 seconds).
Estimated time remaining for 1053226^262144+1 is 1:30:40
1053226^262144+1 is a probable composite. (RES=20ab1a5fde15b30e) (1578768 digits) (err = 0.3906) (time = 1:30:43) 11:40:38
[2014-06-13 11:40:38 CEST] GFN262144: 1053226^262144+1 is not prime. Residue 20ab1a5fde15b30e
$ ./geneferocl -l
geneferocl 3.2.1-0 (Linux/OpenCL/64-bit)
Copyright 2001-2014, Yves Gallot
Copyright 2009, Mark Rodenkirch, David Underbakke
Copyright 2010-2012, Shoichiro Yamada, Ken Brazier
Copyright 2011-2014, Iain Bethune, Michael Goetz, Ronald Schneider
Command line: ./geneferocl -l
Running on platform 'NVIDIA CUDA', device 'GeForce GTX 550 Ti', version 'OpenCL 1.1 CUDA' and driver '304.116'.
Generalized Fermat Number b Limits
Running limits test for transform implementation "OCL"
The upper bound m = 8192, b = 2915000, Err = 0.2969
Starting b = 3340000, Err b = 2920000, Err = 0.3281, 5 Err b = 0
The upper bound m = 16384, b = 2395000, Err = 0.2969
Starting b = 2720000, Err b = 2400000, Err = 0.3125, 5 Err b = 0
The upper bound m = 32768, b = 1965000, Err = 0.2969
Starting b = 2200000, Err b = 1970000, Err = 0.3125, 5 Err b = 0
The upper bound m = 65536, b = 1635000, Err = 0.2969
Starting b = 1790000, Err b = 1640000, Err = 0.3281, 5 Err b = 0
The upper bound m = 131072, b = 1330000, Err = 0.2969
Starting b = 1450000, Err b = 1335000, Err = 0.3125, 5 Err b = 0
The upper bound m = 262144, b = 1080000, Err = 0.2812
Starting b = 1180000, Err b = 1085000, Err = 0.3281, 5 Err b = 0
The upper bound m = 524288, b = 895000, Err = 0.2969
Starting b = 960000, Err b = 900000, Err = 0.3125, 5 Err b = 0
The upper bound m = 1048576, b = 755000, Err = 0.2952
Starting b = 780000, Err b = 760000, Err = 0.3438, 5 Err b = 0
The upper bound m = 2097152, b = 600000, Err = 0.2812
Starting b = 630000, Err b = 605000, Err = 0.3125, 5 Err b = 0
The upper bound m = 4194304, b = 505000, Err = 0.2969
Starting b = 510000, Err b = 0, Err = 0.0000, 5 Err b = 0
The upper bound m = 8388608, b = 405000, Err = 0.3125
Starting b = 410000, Err b = 0, Err = 0.0000, 5 Err b = 0
____________
Sysadm@Nbg
my current lucky number: 3749*2^1555697+1
PSA-PRPNet-Stats-URL: http://u-g-f.de/PRPNet/
|
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
Let the challenge begin!
____________
|
|
|
Sysadm@NbgVolunteer moderator
Volunteer tester
Project scientist
Send message
Joined: 5 Feb 08
Posts: 1188
ID: 18646
Credit: 490,016,651
RAC: 0
|
|
First stats are available, early birds too.
happy weekend :D
____________
Sysadm@Nbg
my current lucky number: 3749*2^1555697+1
PSA-PRPNet-Stats-URL: http://u-g-f.de/PRPNet/
|
|
|
|
|
|
So, we are getting close to the "end" for the GPU work on N=262144? Is that the message I should get from the limits posted? The "leading edge" units being sent out now seem to be in the ~1071*** range. Of course I have no idea how long it will take to get from there to 1180000.
I'm "in" for the challenge. 570 and 770 running OCL. If I were really motivated, I would fire up the Brandenburg Concertos on the 5.1 surround-sound system in the other room, but that might disturb my neighbors. :-)
--Gary
____________
"I am he as you are he as you are me and we are all together"
87*2^3496188+1 is prime! (1052460 digits)
4 is not prime! (1 digit) |
|
|
|
|
|
How can i use the second GPU in my box? Both workunits are using the first GPU.
____________
DeleteNull |
|
|
rogueVolunteer developer
Send message
Joined: 8 Sep 07
Posts: 1218
ID: 12001
Credit: 18,565,548
RAC: 0
 
|
How can i use the second GPU in my box? Both workunits are using the first GPU.
In prpclient.ini there is a gpuaffinity= setting. Try that. It should work for the CUDA version of genefer, but I don't know if it works with the OpenCL version of genefer. |
|
|
|
|
How can i use the second GPU in my box? Both workunits are using the first GPU.
In prpclient.ini there is a gpuaffinity= setting. Try that. It should work for the CUDA version of genefer, but I don't know if it works with the OpenCL version of genefer.
It does seem to work with OpenCL. At least for me :-)
--G |
|
|
|
|
|
Wrong board
____________
Proud Founder of 
Have a look at my WebCam
My best Prime 46776558131072+1 |
|
|
|
|
|
OCL doesn't work with two GPU. Now one GPU (ATI) is running with OCL, the other (NVIDIA) with CUDA.
I had to download cufft32_55.dll from mersenne.org to get CUDA running.
____________
DeleteNull |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
AMD HD7970 managed 31 WUs before it got its first maxErr:
maxErr exceeded for 1074752^262144+1, 0.4531 > 0.4500
We're entering the grey zone. AMD cards seem to get hit before NVIDIA cards.
prpclient_memleak.txt had a dump in it and the prpclient seem to have hung after the maxerr.
Would be nice if it errored gracefully.
Deleted the temporary files and restarted.
From previous experience I expect to get maxerr more and more till I give up and have to stop using my GPU on this port.
From running ">geneferocl.exe -l" I expect 1,085,000 for GFN262144 and 895,000 for GFN524288 for this new version of genefer, although the limit is fuzzy.
Every type of card may be different but I posted my results here: http://www.primegrid.com/forum_thread.php?id=5389&nowrap=true#77176 |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
Good work party people! In the first 24 hours of the Challenge we've completed 913 WU's.
That give us a 2.14% chance of having found a prime:
http://yves.gallot.pagesperso-orange.fr/primes/stat.html |
|
|
|
|
|
geneferocl for Linux appears to be built on a newer linux machine, so the binary included with the PRPNet client requires GLIBC_2.14, i.e. at least glibc-2.18 (which in turn requires kernel >= 2.6.19). I have quite a few servers with exactly 2.6.18 (!) and these are not up for system upgrade (many running services will/may be screwed).
Could the builder of the geneferocl for Linux on a slightly older linux machine (with all other parameters/versions the same)? This might widen the linux user base - I am not alone with a pre-Jun 2013 linux computer, am I?
Thank you in advance.
|
|
|
|
|
|
What does this mean, Problem renaming genefer.ckpt to genefer.ckpt.old
I'm admin of the box so I don't think it's a permissions issue.
[2014-06-14 14:47:01 CDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-14 14:47:02 CDT] GFN262144: PRPNet server is version 5.3.0
Hi! Welcome to PrimeGrid's GFN 262144 Prime Search.
genefer 3.2.1-0 (Windows/CPU/64-bit)
Supported transform implementations: default x87 sse2 sse4 avx
Copyright 2001-2014, Yves Gallot
Copyright 2009, Mark Rodenkirch, David Underbakke
Copyright 2010-2012, Shoichiro Yamada, Ken Brazier
Copyright 2011-2014, Iain Bethune, Michael Goetz, Ronald Schneider
Command line: genefer64.exe work_GFN262144.in
Priority change succeeded.
Start test of file 'work_GFN262144.in' - 14:47:02
Testing 1080286^262144+1...
Using AVX transform
Starting initialization...
Initialization complete (0.477 seconds).
Estimated time remaining for 1080286^262144+1 is 1:50:29
Testing 1080286^262144+1... 3018752 steps to go (1:04:34 remaining)
at i=3018752. Continuing processing anyway...
Problem renaming genefer.ckpt.new to genefer.ckpt at i=3018752. Continuing processing anyway...
Testing 1080286^262144+1... 2867200 steps to go (1:01:19 remaining)
____________
|
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
              
|
What does this mean, Problem renaming genefer.ckpt to genefer.ckpt.old
I'm admin of the box so I don't think it's a permissions issue.
Unfortunately, it means exactly what it says. The system call to rename the checkpoint file failed.
Possible causes include (but are not limited to):
* Permission or ownership problems.
* Files being locked (by "zombie" processes, by backup programs, by anti-virus programs, by search index programs, etc.)
* Running out of disk space, inodes, or similar.
* File system corruption or disk errors
Permission and ownership problems are common, especially in Windows if you've either re-installed Windows or restored the BOINC data directory from a backup. Uninstalling BOINC, deleting the entire BOINC data directory, and reinstalling BOINC will usually fix this.
Sometimes BOINC apps don't die correctly ("zombie") and keep running. They might keep some files locked. This can be cleared by rebooting the computer.
EDIT: You're likely talking about PRPNet, so substitute PRPNet for BOINC and the answer is still mostly valid.
____________
My lucky number is 75898524288+1 |
|
|
|
|
geneferocl for Linux appears to be built on a newer linux machine, so the binary included with the PRPNet client requires GLIBC_2.14, i.e. at least glibc-2.18 (which in turn requires kernel >= 2.6.19). I have quite a few servers with exactly 2.6.18 (!) and these are not up for system upgrade (many running services will/may be screwed).
Could the builder of the geneferocl for Linux on a slightly older linux machine (with all other parameters/versions the same)? This might widen the linux user base - I am not alone with a pre-Jun 2013 linux computer, am I?
Thank you in advance.
Well, I built it from the SVN 685 snapshot. No problem (albeit tedious with all prereqs).
Runs fine.
|
|
|
|
|
|
Just saw the notice this morning. Running now
____________
PrimeSearch Team |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
With 48 hours passed in the challenge we currently have 37 competitors.
21 of those are new to the GFN262144 sub-project, welcome!
2279 WUs have been tested. That gives us a:
5.17% chance of having found one prime; and
0.14% chance of having found two primes.
If we continue testing at this rate we will have tested 10,255 WUs by the end of the challenge giving us a:
19.19% chance of having found one prime; and
2.35% chance of having found two primes; and
0.19% chance of having found three primes.
So in this challenge would expect 0.2446 GF primes, on average. |
|
|
Sysadm@NbgVolunteer moderator
Volunteer tester
Project scientist
Send message
Joined: 5 Feb 08
Posts: 1188
ID: 18646
Credit: 490,016,651
RAC: 0
|
If we continue testing at this rate we will have tested 10,255 WUs by the end of the challenge
I dont think we could keep the performance because the GPUs will go one by one into the maxErr
____________
Sysadm@Nbg
my current lucky number: 3749*2^1555697+1
PSA-PRPNet-Stats-URL: http://u-g-f.de/PRPNet/
|
|
|
|
|
|
Is there an .ini change I can make to force x87 testing?
seems like a lot of wasted cycles.
Both PCs maxerr using AVX and SSE3, then switch to x87
Starting initialization...
Initialization complete (0.876 seconds).
Estimated time remaining for 1086300^262144+1 is 4:14:26
Testing 1086300^262144+1... 4456448 steps to go (4:54:23 remaining)
maxErr exceeded for 1086300^262144+1, 0.4531 > 0.4500
maxErr exceeded while using AVX; switching to SSE3.
Testing 1086300^262144+1...
Using SSE3 transform
Resuming 1086300^262144+1 from a checkpoint (4456447 iterations left)
maxErr exceeded for 1086300^262144+1, 0.4531 > 0.4500
maxErr exceeded while using SSE3; switching to x87 (80-bit).
Testing 1086300^262144+1...
Using x87 (80-bit) transform
Resuming 1086300^262144+1 from a checkpoint (4456447 iterations left)
Estimated time remaining for 1086300^262144+1 is 17:43:13
Testing 1086300^262144+1... 4452352 steps to go (17:39:19 remaining)
Successful computation progress with x87 (80-bit); switching back to AVX.
Testing 1086300^262144+1...
Using AVX transform
Resuming 1086300^262144+1 from a checkpoint (4452351 iterations left)
Estimated time remaining for 1086300^262144+1 is 4:12:41
Testing 1086300^262144+1... 2129920 steps to go (2:00:43 remaining)
maxErr exceeded for 1086300^262144+1, 0.4844 > 0.4500
maxErr exceeded while using AVX; switching to SSE3.
Testing 1086300^262144+1...
Using SSE3 transform
Resuming 1086300^262144+1 from a checkpoint (2129919 iterations left)
Estimated time remaining for 1086300^262144+1 is 3:07:59
maxErr exceeded for 1086300^262144+1, 0.4844 > 0.4500
maxErr exceeded while using SSE3; switching to x87 (80-bit).
Too many errors with SSE3; Calculation will proceed using only more accurate tra
nsforms.
Testing 1086300^262144+1...
Using x87 (80-bit) transform
Resuming 1086300^262144+1 from a checkpoint (2129919 iterations left)
Estimated time remaining for 1086300^262144+1 is 8:26:04
Testing 1086300^262144+1... 1511424 steps to go (5:36:32 remaining)
____________
PrimeSearch Team |
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
Is there an .ini change I can make to force x87 testing?
seems like a lot of wasted cycles.
Both PCs maxerr using AVX and SSE3, then switch to x87
I'm not sure if there is or is not. You can do it from the command line, but I don't know if PRPNet supports it.
Even if it did, you wouldn't want to use it while we're this close to the b limit. Each calculation typically takes millions of iterations. When you first start seeing MaxErr exceeded errors, it's only happening on a few of those iterations. All the others are fine.
x87 is MUCH slower than SSE3. It's even slower when compared to AVX or FMA. 10 times slower probably isn't much of an exaggeration. For n=16 (i.e., the tasks in this challenge), on my computer FMA is 13 times faster than x87.
Given the difference in speed, even running 10 percent of the calculation with the faster transform is worthwhile. With one of the examples you posted, it looks like you got about 50% of the way through the calculation. Being able to run part of the calculation with the faster transform is worthwhile.
____________
My lucky number is 75898524288+1 |
|
|
|
|
|
Fair enough, I'll leave it to it's business.
Thank you
____________
PrimeSearch Team |
|
|
|
|
If we continue testing at this rate we will have tested 10,255 WUs by the end of the challenge
I dont think we could keep the performance because the GPUs will go one by one into the maxErr
Right, I assumed this was just me... Why? A reset every 6ish WUs? |
|
|
|
|
|
Do you use genefer.exe or genefer64.exe?
genefer64 log: "Supported transform implementations: default x87 sse2 sse4" but no sse3?!
____________
DeleteNull |
|
|
|
|
|
I'm using geneferocl.exe. |
|
|
|
|
Do you use genefer.exe or genefer64.exe?
genefer64 log: "Supported transform implementations: default x87 sse2 sse4" but no sse3?!
See this
http://www.primegrid.com/forum_thread.php?id=5740&nowrap=true#77106
____________
|
|
|
|
|
|
Thanks for the hint. But in the post from MarkHFX you can see this:
Testing 1086300^262144+1...
Using SSE3 transform
Resuming 1086300^262144+1 from a checkpoint (4456447 iterations left)
____________
DeleteNull |
|
|
|
|
|
Is he using an older executable or client?
____________
|
|
|
|
|
|
Edit: Yes, confused.
So, to clarify, is this a bug across all Genefers, both GPU and CPU? I'm confused, I can't believe it's a bug, the mods would have told us to use an older version of [whatever] by now.
Edit 2: I know the exe is switching without input, but whatever the case, you don't want to switch to geneferx87 for this challenge, for any reason. I think the only advantage of x87 is a greater b limit, which is waaaaaaaay out of target for this. |
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
Edit: Yes, confused.
So, to clarify, is this a bug across all Genefers, both GPU and CPU? I'm confused, I can't believe it's a bug, the mods would have told us to use an older version of [whatever] by now.
Edit 2: I know the exe is switching without input, but whatever the case, you don't want to switch to geneferx87 for this challenge, for any reason. I think the only advantage of x87 is a greater b limit, which is waaaaaaaay out of target for this.
It's switching to x87 because it has to. You're at the ragged edge where x87 is sometimes necessary for the precision needed to avoid the MaxErr exceeded errors. It won't happen on every task, but the higher b gets, the more frequently it will happen.
Using the -l switch, I see these limits an n=16:
FMA: 1,175,000
AVX: 1,175,000
SSE4: 1,175,000
SSE2: 1,175,000
X87: 35,840,000
As you can see, the b limit is the same for all the "modern" transforms, and much larger for x87 (which uses 80 bit math rather than 64 bit math).
Also for comparison, here's the time measurements for each transform at n=16. The numbers represent the time for each iteration (lower is better):
FMA: 1.08 ms
AVX: 1.20 ms
SSE4: 2.21 ms
SSE2: 2.59 ms
X87: 13.3 ms
As you can see, based on the b limits and the timings, the best strategy is to use the best instruction set supported by the CPU until you exceed the round error threshold ("MaxErr exceeded"), and then switch to x87.
____________
My lucky number is 75898524288+1 |
|
|
|
|
|
What about GPUs?
Do they only use 64 bit math?
____________
|
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
What about GPUs?
Do they only use 64 bit math?
Yes.
____________
My lucky number is 75898524288+1 |
|
|
|
|
Is he using an older executable or client?
All Genefers dated May 17, 2014
I'm fine with it. My dual GPU is leant atm so I'm feeling the drag.
____________
PrimeSearch Team |
|
|
|
|
|
The newest executables: dated May 29, 2014
____________
DeleteNull |
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
Is he using an older executable or client?
All Genefers dated May 17, 2014
I'm fine with it. My dual GPU is leant atm so I'm feeling the drag.
You're using the previous version of Genefer, by virtue of the fact that it used the SSE3 transform which was removed in the most recent version.
Whether to upgrade or not is up to you. The latest version of Genefer is significantly faster than the version you're currently running.
____________
My lucky number is 75898524288+1 |
|
|
|
|
|
I didn't know that about the b limits, so thanks.
But something is wrong with my PC and possibly others', which can run a few WUs and then hit an unrecoverable maxerr on the GPU.
If we continue testing at this rate we will have tested 10,255 WUs by the end of the challenge
I dont think we could keep the performance because the GPUs will go one by one into the maxErr
That^ is what convinced me that it wasn't just me experiencing the problem.
On the CPU side I might have an incompatibility (although I can't see why) but I've not tried to fix that. |
|
|
|
|
|
Updated
Thanks for the heads up
*edit- substantially faster as stated
____________
PrimeSearch Team |
|
|
|
|
|
Why is Sysadm@Nbg seeing this problem too?
When this maxerr occurs for me, then deleting the progress/save files and starting again works. Is it really that we're all hitting the high b figures? No problems, anyway... |
|
|
|
|
Is it really that we're all hitting the high b figures? No problems, anyway...
Yes, it is.
It is not too far away that only CPU version will be able to handle the tasks (around ~1.15M), and then only the 80-bit variant (around ~1.175M).
The boundary is soft - some inputs will fail, while some will still come through (even with low err values, as low as 0.4062). |
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
Why is Sysadm@Nbg seeing this problem too?
Is it really that we're all hitting the high b figures? No problems, anyway...
In a word, yes.
If you remember, the CPU programs reported a b limit of 1,175,000.
GeneferCUDA's limit is 1,010,000.
GeneferOCL's limit is 1,090,000.
Both GPU programs should start getting errors slightly before the CPU program does.
When this maxerr occurs for me, then deleting the progress/save files and starting again works.
If the problem isn't repeatable, however, it's more indicative of an overclocking problem.
____________
My lucky number is 75898524288+1 |
|
|
|
|
|
Hi
I have two of these. both on the same box. should I abort or let them run?
Running on platform 'NVIDIA CUDA', device 'GeForce GTX 780', version 'OpenCL 1.1
CUDA' and driver '331.82'.
Start test of file 'work_GFN262144.in' - 20:59:05
Testing 1096064^262144+1...
Using OCL transform
Starting initialization...
Initialization complete (0.831 seconds).
Estimated time remaining for 1096064^262144+1 is 0:29:47
Testing 1096064^262144+1... 4718592 steps to go (0:25:09 remaining)
maxErr exceeded for 1096064^262144+1, 0.4688 > 0.4500
maxErr exceeded by all available transform implementations
Base factorized as : 2^7*8563
Base prime factor(s) taken : 8563
Starting N-1 prime test of 1096064^262144+1
Using generic reduction Pentium4 FFT length 560K, Pass1=448, Pass2=1280, a = 3
1096064^262144+1, bit: 310000 / 5259612 [5.89%]. Time per bit: 24.663 ms.
Cheers
Ross*
____________
|
|
|
Sysadm@NbgVolunteer moderator
Volunteer tester
Project scientist
Send message
Joined: 5 Feb 08
Posts: 1188
ID: 18646
Credit: 490,016,651
RAC: 0
|
|
as of now the maxErr reached my configuration
maxErr exceeded for 1097868^262144+1, 0.4531 > 0.4500
maxErr exceeded by all available transform implementations
@Ross*
if configured correctly the app switched from GPU to CPU, the GPU isnt used for this test; next test will try again GPU and will fall back to CPU if it gets a maxErr too (and so on).
After the "grey zone" you will fall back every test, so the use of GPU is unprofitable
____________
Sysadm@Nbg
my current lucky number: 3749*2^1555697+1
PSA-PRPNet-Stats-URL: http://u-g-f.de/PRPNet/
|
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
|
I suggest making sure you have PFGW commented out so that, if the GPU app exceeds the rounding error, it falls back the CPU version of Genefer rather than PFGW.
I'm not sure of the order in which PRPNet runs the available programs, but some of the logs being posted seem to show output from PFGW.
____________
My lucky number is 75898524288+1 |
|
|
Sysadm@NbgVolunteer moderator
Volunteer tester
Project scientist
Send message
Joined: 5 Feb 08
Posts: 1188
ID: 18646
Credit: 490,016,651
RAC: 0
|
I'm not sure of the order in which PRPNet runs the available programs, but some of the logs being posted seem to show output from PFGW.
for linux the described behaviour
// This is the name of the genefer executables used for GFN searches. Up
// to four different Genefer programs can be specified. The client will
// attempt a test in the following order if applications are available:
// genefercuda/geneferocl, genefer, and pfgw. If a round off error
// occurs, the test will restart with the next available application in the
// same order. The order they are specified below is not important.
is running
____________
Sysadm@Nbg
my current lucky number: 3749*2^1555697+1
PSA-PRPNet-Stats-URL: http://u-g-f.de/PRPNet/
|
|
|
pschoeferVolunteer developer
Volunteer tester
Send message
Joined: 20 Sep 05
Posts: 662
ID: 845
Credit: 2,220,370,221
RAC: 0
                 
|
maxErr exceeded for 1096064^262144+1, 0.4688 > 0.4500
maxErr exceeded by all available transform implementations
Base factorized as : 2^7*8563
Base prime factor(s) taken : 8563
Starting N-1 prime test of 1096064^262144+1
Using generic reduction Pentium4 FFT length 560K, Pass1=448, Pass2=1280, a = 3
1096064^262144+1, bit: 310000 / 5259612 [5.89%]. Time per bit: 24.663 ms.
That's LLR running on CPU which is likely slower than the CPU versions of Genefer.
If you don't want that fallback to CPU after exceeding maxErr with Genefer on GPU, you have to comment out not only the CPU versions of Genefer, but also PFGW and LLR.
____________
  |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
My average maxErr is now above 0.44 but only 3 of the last 23 WUs exceeded maxErr=0.45, so still profitable. Once average maxErr hits 0.45 will have to move GPU to GFN524288.
I commented out llr and pfgw and set startoption=3 and stopoption=2 in prpclient.ini and now get the following behaviour with maxErr:
maxErr exceeded for 1100680^262144+1, 0.4531 > 0.4500
maxErr exceeded by all available transform implementations
[2014-06-17 03:16:48 WAST] GFN262144: 1100680^262144+1 is not prime. Residue roundofferr
[2014-06-17 03:16:48 WAST] Total Time: 5:35:26 Total Work Units: 14 Special Results Found: 0
[2014-06-17 03:16:51 WAST] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-17 03:16:52 WAST] GFN262144: INFO: Test for 1100680^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-17 03:16:52 WAST] GFN262144: INFO: All 1 test results were accepted
Means its handled automatically and I don't have to Ctrl-C and delete temporary files to get it going again. |
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
GFN262144: INFO: Test for 1100680^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
Are you running an old version of PRPNet or Genefer? Or is something broken?
____________
My lucky number is 75898524288+1 |
|
|
|
|
|
I've looked everywhere in the project directory and nowhere do I have a prpclient.ini file. I'm running the latest BOINC manager and I'm attached to the primegrid project. What am I missing?
Thanks!
Chris
BTW -- I'm running Windows 7 |
|
|
|
|
|
Hello GuamChris,
PRPNet does not use boinc.
Download this zip file and read the readme_primegrid.txt file that is inside to learn how to set it up.
http://uwin.mine.nu/PRPNet/prpclient-5.3.1-windows.7z
____________
|
|
|
|
|
GFN262144: INFO: Test for 1100680^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
Are you running an old version of PRPNet or Genefer? Or is something broken?
I also got this message with the latest 5.3.1 prpnet client on this server. On my side this message occurs, when I got the maxerror by the gpu and commented out all cpu executables in prpnet.ini. I think the server handles this "false" message because of the reported roundofferr reside by the client.
Regards Odi
____________
 |
|
|
|
|
GFN262144: INFO: Test for 1100680^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
Are you running an old version of PRPNet or Genefer? Or is something broken?
I also got this message with the latest 5.3.1 prpnet client on this server. On my side this message occurs, when I got the maxerror by the gpu and commented out all cpu executables in prpnet.ini. I think the server handles this "false" message because of the reported roundofferr reside by the client.
Regards Odi
You are correct, the message is spurious, and it being incorrectly generated by the server when the task hit a round-off error. Your application and/or client version are probably fine. I've fixed the message in the SVN code and at some point we will release a new version. For now, you can safely ignore that error message.
Cheers
- Iain
____________
Twitter: IainBethune
Proud member of team "Aggie The Pew". Go Aggie!
3073428256125*2^1290000-1 is Prime! |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
GFN262144: INFO: Test for 1100680^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
Are you running an old version of PRPNet or Genefer? Or is something broken?
I am using prpclient v5.3.1 downloaded on the 10th of June 2014.
I guessing that the prpclient is wanting to report to the Server that it's abandoning the Test.
The Server must be rejecting this attempt due to a code path in the prpclient not updated with the latest version checking protocol.
My abandoned Tests are just building up on the server when they should be returned to the untested pool.
3 of my last 29 GPU tests had maxErr.
The GFN262144 server is up to 735 WUs in progress. A lot of these will be abandoned tests like mine. The number will increase greatly as "B" goes higher.
Even so, WUs will expire and the situation will right itself. |
|
|
|
|
|
When I updated I also found geneferexe=genefer64.exe commented out in favour of the 32 bit vsn in the master_prpclient.ini file.
Once running in 64 bit mode it virtually eliminated errors, and output went up tenfold.
For me anyway
____________
PrimeSearch Team |
|
|
|
|
Hello GuamChris,
PRPNet does not use boinc.
Download this zip file and read the readme_primegrid.txt file that is inside to learn how to set it up.
http://uwin.mine.nu/PRPNet/prpclient-5.3.1-windows.7z
..or alternatively check out This Post for an easier way to set up under Windows..
____________
 |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
The GFN262144 server is up to 2261 WUs in progress.
Average maxErr of my last 28 WUs was 0.4602.
Only 5 of those last 28 had maxErr below 0.45.
So my AMD HD7970 GPU is now less productive than my CPU on this port.
I am moving my GPU over to GFN524288. |
|
|
|
|
The GFN262144 server is up to 2261 WUs in progress.
Average maxErr of my last 28 WUs was 0.4602.
Only 5 of those last 28 had maxErr below 0.45.
So my AMD HD7970 GPU is now less productive than my CPU on this port.
I am moving my GPU over to GFN524288.
Good idea, I'll put my 7970 on 288 also.
Est time 1:51:00.
____________
|
|
|
|
|
|
I am getting this error on my work units "Your application and/or prpclient is obsolete and MUST be upgraded" Does that mean that I am doing them for no reason and they are being aborted? Just noticed it in the log.
This is on a GPU and I am using geneferexe=geneferocl.exe which as you can see in the log worked fine for a long time.
It is a GTX 750Ti with the latest drivers for that card.
I have re installed 5.3.1 and starting again but will see if the error is gone.
At the start of the log it started using 5.3.1 and then switched to 5.3.0 for some reason?
PRPNet Client application v5.3.1 started
[2014-06-14 22:23:42 EDT] User name Dingo at email address is boinc@dingo-den.com
[2014-06-14 23:02:48 EDT] GFN262144: 1081856^262144+1 is not prime. Residue d187e24c380e9961
[2014-06-15 00:33:05 EDT] GFN262144: 1081864^262144+1 is not prime. Residue fef10fd784179476
[2014-06-15 02:01:16 EDT] GFN262144: 1081868^262144+1 is not prime. Residue 637c0187f3ddf26d
[2014-06-15 02:01:16 EDT] Total Time: 3:37:35 Total Work Units: 3 Special Results Found: 0
[2014-06-15 02:01:16 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-15 02:01:16 EDT] GFN262144: INFO: Test for 1081854^262144+1 was accepted
[2014-06-15 02:01:16 EDT] GFN262144: INFO: Test for 1081856^262144+1 was accepted
[2014-06-15 02:01:17 EDT] GFN262144: INFO: Test for 1081864^262144+1 was accepted
[2014-06-15 02:01:17 EDT] GFN262144: INFO: Test for 1081868^262144+1 was accepted
[2014-06-15 02:01:17 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-15 02:01:17 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-15 02:01:18 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-15 03:29:12 EDT] GFN262144: 1084198^262144+1 is not prime. Residue 6af7a87df10f5844
[2014-06-15 04:55:52 EDT] GFN262144: 1084204^262144+1 is not prime. Residue 92a6fc83186112ba
[2014-06-15 06:22:32 EDT] GFN262144: 1084212^262144+1 is not prime. Residue 210cd3dc41fb4925
[2014-06-15 07:50:06 EDT] GFN262144: 1084214^262144+1 is not prime. Residue 291fd81fc9988922
[2014-06-15 07:50:06 EDT] Total Time: 9:26:25 Total Work Units: 7 Special Results Found: 0
Continue log further down:
2014-06-16 13:27:36 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-16 13:27:36 EDT] GFN262144: INFO: Test for 1097222^262144+1 was accepted
[2014-06-16 13:27:36 EDT] GFN262144: INFO: Test for 1097234^262144+1 was accepted
[2014-06-16 13:27:36 EDT] GFN262144: INFO: Test for 1097236^262144+1 was accepted
[2014-06-16 13:27:37 EDT] GFN262144: INFO: Test for 1097246^262144+1 was accepted
[2014-06-16 13:27:37 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-16 13:27:37 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-16 13:27:38 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-16 14:57:15 EDT] GFN262144: 1099782^262144+1 is not prime. Residue f97296ecef88ac51
[2014-06-16 15:14:36 EDT] GFN262144: 1099786^262144+1 is not prime. Residue roundofferr
[2014-06-16 16:08:42 EDT] GFN262144: 1099790^262144+1 is not prime. Residue roundofferr
[2014-06-16 17:10:52 EDT] GFN262144: 1099796^262144+1 is not prime. Residue roundofferr
[2014-06-16 17:10:52 EDT] Total Time: 27:30:11 Total Work Units: 20 Special Results Found: 0
[2014-06-16 17:10:52 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-16 17:10:52 EDT] GFN262144: INFO: Test for 1099782^262144+1 was accepted
[2014-06-16 17:10:53 EDT] GFN262144: INFO: Test for 1099786^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-16 17:10:53 EDT] GFN262144: INFO: Test for 1099790^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-16 17:10:53 EDT] GFN262144: INFO: Test for 1099796^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-16 17:10:53 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-16 17:10:53 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-16 17:10:55 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-16 18:40:49 EDT] GFN262144: 1101844^262144+1 is not prime. Residue 7ac4a78a584590cb
[2014-06-16 20:10:20 EDT] GFN262144: 1101848^262144+1 is not prime. Residue c4aa9b8375a472a1
[2014-06-16 21:38:59 EDT] GFN262144: 1101852^262144+1 is not prime. Residue e8e3d420f47cf90e
[2014-06-16 23:09:24 EDT] GFN262144: 1101854^262144+1 is not prime. Residue 474d58d332f44dab
[2014-06-16 23:09:24 EDT] Total Time: 33:28:43 Total Work Units: 24 Special Results Found: 0
[2014-06-16 23:09:24 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-16 23:09:25 EDT] GFN262144: INFO: Test for 1101844^262144+1 was accepted
[2014-06-16 23:09:25 EDT] GFN262144: INFO: Test for 1101848^262144+1 was accepted
[2014-06-16 23:09:25 EDT] GFN262144: INFO: Test for 1101852^262144+1 was accepted
[2014-06-16 23:09:25 EDT] GFN262144: INFO: Test for 1101854^262144+1 was accepted
[2014-06-16 23:09:25 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-16 23:09:26 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-16 23:09:27 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-17 00:39:26 EDT] GFN262144: 1104892^262144+1 is not prime. Residue 20df1fdca09253d3
[2014-06-17 01:03:43 EDT] GFN262144: No data in file [genefer.log]. Is genefer broken?
[2014-06-17 01:04:10 EDT] PRPNet Client application v5.3.1 started
[2014-06-17 01:04:10 EDT] User name Dingo at email address is boinc@dingo-den.com
[2014-06-17 02:10:19 EDT] GFN262144: 1104902^262144+1 is not prime. Residue 4d96d17be5692286
[2014-06-17 03:40:25 EDT] GFN262144: 1104906^262144+1 is not prime. Residue roundofferr
[2014-06-17 05:10:36 EDT] GFN262144: 1104912^262144+1 is not prime. Residue 315a6c2da760f346
[2014-06-17 05:10:36 EDT] Total Time: 4:06:26 Total Work Units: 3 Special Results Found: 0
[2014-06-17 05:10:36 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-17 05:10:36 EDT] GFN262144: INFO: Test for 1104892^262144+1 was accepted
[2014-06-17 05:10:37 EDT] GFN262144: INFO: Test for 1104902^262144+1 was accepted
[2014-06-17 05:10:37 EDT] GFN262144: INFO: Test for 1104906^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-17 05:10:37 EDT] GFN262144: INFO: Test for 1104912^262144+1 was accepted
[2014-06-17 05:10:37 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-17 05:10:37 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-17 05:10:38 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-17 06:41:07 EDT] GFN262144: 1107970^262144+1 is not prime. Residue 8d02540d3e73f53d
[2014-06-17 07:13:56 EDT] GFN262144: 1107972^262144+1 is not prime. Residue roundofferr
[2014-06-17 08:43:45 EDT] GFN262144: 1107974^262144+1 is not prime. Residue a42d31d8f0773272
[2014-06-17 08:53:06 EDT] GFN262144: 1107996^262144+1 is not prime. Residue roundofferr
[2014-06-17 08:53:06 EDT] Total Time: 7:48:56 Total Work Units: 7 Special Results Found: 0
[2014-06-17 08:53:06 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-17 08:53:07 EDT] GFN262144: INFO: Test for 1107970^262144+1 was accepted
[2014-06-17 08:53:07 EDT] GFN262144: INFO: Test for 1107972^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-17 08:53:07 EDT] GFN262144: INFO: Test for 1107974^262144+1 was accepted
[2014-06-17 08:53:07 EDT] GFN262144: INFO: Test for 1107996^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-17 08:53:07 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-17 08:53:07 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-17 08:53:09 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-17 10:22:44 EDT] GFN262144: 1110130^262144+1 is not prime. Residue b633a73444202186
[2014-06-17 11:53:05 EDT] GFN262144: 1110146^262144+1 is not prime. Residue 50799cc5d1c7540b
[2014-06-17 13:23:45 EDT] GFN262144: 1110152^262144+1 is not prime. Residue 6fbc1fbf155a0070
[2014-06-17 13:43:09 EDT] GFN262144: 1110166^262144+1 is not prime. Residue roundofferr
[2014-06-17 13:43:09 EDT] Total Time: 12:38:59 Total Work Units: 11 Special Results Found: 0
[2014-06-17 13:43:09 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-17 13:43:09 EDT] GFN262144: INFO: Test for 1110130^262144+1 was accepted
[2014-06-17 13:43:09 EDT] GFN262144: INFO: Test for 1110146^262144+1 was accepted
[2014-06-17 13:43:10 EDT] GFN262144: INFO: Test for 1110152^262144+1 was accepted
[2014-06-17 13:43:10 EDT] GFN262144: INFO: Test for 1110166^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-17 13:43:10 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-17 13:43:10 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-17 13:43:11 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-17 15:12:52 EDT] GFN262144: 1114008^262144+1 is not prime. Residue ea32bf177ece2c56
[2014-06-17 16:42:25 EDT] GFN262144: 1114010^262144+1 is not prime. Residue 8e90e1a1d52f5365
[2014-06-17 18:12:48 EDT] GFN262144: 1114020^262144+1 is not prime. Residue 7bc36606c751e456
[2014-06-17 18:28:51 EDT] GFN262144: 1114022^262144+1 is not prime. Residue roundofferr
[2014-06-17 18:28:51 EDT] Total Time: 17:24:41 Total Work Units: 15 Special Results Found: 0
[2014-06-17 18:28:51 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-17 18:28:51 EDT] GFN262144: INFO: Test for 1114008^262144+1 was accepted
[2014-06-17 18:28:51 EDT] GFN262144: INFO: Test for 1114010^262144+1 was accepted
[2014-06-17 18:28:52 EDT] GFN262144: INFO: Test for 1114020^262144+1 was accepted
[2014-06-17 18:28:52 EDT] GFN262144: INFO: Test for 1114022^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-17 18:28:52 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-17 18:28:52 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-17 18:28:53 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-17 19:46:17 EDT] GFN262144: 1117204^262144+1 is not prime. Residue roundofferr
[2014-06-17 21:16:45 EDT] GFN262144: 1117210^262144+1 is not prime. Residue f273bac08d0b427e
[2014-06-17 22:46:27 EDT] GFN262144: 1117212^262144+1 is not prime. Residue 4587439bd841a314
[2014-06-18 00:15:43 EDT] GFN262144: 1117240^262144+1 is not prime. Residue 96e43ff180868bb4
[2014-06-18 00:15:43 EDT] Total Time: 23:11:33 Total Work Units: 19 Special Results Found: 0
[2014-06-18 00:15:43 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 00:15:43 EDT] GFN262144: INFO: Test for 1117204^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 00:15:43 EDT] GFN262144: INFO: Test for 1117210^262144+1 was accepted
[2014-06-18 00:15:44 EDT] GFN262144: INFO: Test for 1117212^262144+1 was accepted
[2014-06-18 00:15:44 EDT] GFN262144: INFO: Test for 1117240^262144+1 was accepted
[2014-06-18 00:15:44 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 00:15:44 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 00:15:45 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 00:21:20 EDT] GFN262144: No data in file [genefer.log]. Is genefer broken?
[2014-06-18 00:21:41 EDT] PRPNet Client application v5.3.1 started
[2014-06-18 00:21:41 EDT] User name Dingo at email address is boinc@dingo-den.com
[2014-06-18 01:46:38 EDT] GFN262144: 1121672^262144+1 is not prime. Residue 70dd0d9f567e6f2e
[2014-06-18 03:15:29 EDT] GFN262144: 1121678^262144+1 is not prime. Residue 3766a81a5b971d65
[2014-06-18 04:13:23 EDT] GFN262144: 1121682^262144+1 is not prime. Residue roundofferr
[2014-06-18 04:16:04 EDT] GFN262144: 1121704^262144+1 is not prime. Residue roundofferr
[2014-06-18 04:16:04 EDT] Total Time: 3:54:23 Total Work Units: 4 Special Results Found: 0
[2014-06-18 04:16:04 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 04:16:05 EDT] GFN262144: INFO: Test for 1121672^262144+1 was accepted
[2014-06-18 04:16:05 EDT] GFN262144: INFO: Test for 1121678^262144+1 was accepted
[2014-06-18 04:16:05 EDT] GFN262144: INFO: Test for 1121682^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 04:16:05 EDT] GFN262144: INFO: Test for 1121704^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 04:16:05 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 04:16:05 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 04:16:07 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 05:44:43 EDT] GFN262144: 1124964^262144+1 is not prime. Residue 849da1d0bc12d3dd
[2014-06-18 06:14:57 EDT] GFN262144: 1124970^262144+1 is not prime. Residue roundofferr
[2014-06-18 07:44:23 EDT] GFN262144: 1124972^262144+1 is not prime. Residue 29987d5846c675c1
[2014-06-18 07:52:37 EDT] GFN262144: 1124976^262144+1 is not prime. Residue roundofferr
[2014-06-18 07:52:37 EDT] Total Time: 7:30:56 Total Work Units: 8 Special Results Found: 0
[2014-06-18 07:52:37 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 07:52:37 EDT] GFN262144: INFO: Test for 1124964^262144+1 was accepted
[2014-06-18 07:52:37 EDT] GFN262144: INFO: Test for 1124970^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 07:52:37 EDT] GFN262144: INFO: Test for 1124972^262144+1 was accepted
[2014-06-18 07:52:38 EDT] GFN262144: INFO: Test for 1124976^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 07:52:38 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 07:52:38 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 07:52:39 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 08:22:55 EDT] GFN262144: 1127930^262144+1 is not prime. Residue roundofferr
[2014-06-18 09:52:04 EDT] GFN262144: 1127932^262144+1 is not prime. Residue b9566f652eb18b88
[2014-06-18 11:22:48 EDT] GFN262144: 1127934^262144+1 is not prime. Residue 3c0ea4489bd1e863
[2014-06-18 12:33:56 EDT] GFN262144: 1127938^262144+1 is not prime. Residue roundofferr
[2014-06-18 12:33:56 EDT] Total Time: 12:12:15 Total Work Units: 12 Special Results Found: 0
[2014-06-18 12:33:57 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 12:33:57 EDT] GFN262144: INFO: Test for 1127930^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 12:33:57 EDT] GFN262144: INFO: Test for 1127932^262144+1 was accepted
[2014-06-18 12:33:57 EDT] GFN262144: INFO: Test for 1127934^262144+1 was accepted
[2014-06-18 12:33:57 EDT] GFN262144: INFO: Test for 1127938^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 12:33:57 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 12:33:58 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 12:33:59 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 12:48:03 EDT] GFN262144: 1132122^262144+1 is not prime. Residue roundofferr
[2014-06-18 12:58:38 EDT] GFN262144: 1132132^262144+1 is not prime. Residue roundofferr
[2014-06-18 14:26:17 EDT] GFN262144: 1132142^262144+1 is not prime. Residue roundofferr
[2014-06-18 14:48:02 EDT] GFN262144: 1132144^262144+1 is not prime. Residue roundofferr
[2014-06-18 14:48:02 EDT] Total Time: 14:26:21 Total Work Units: 16 Special Results Found: 0
[2014-06-18 14:48:03 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 14:48:03 EDT] GFN262144: INFO: Test for 1132122^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 14:48:03 EDT] GFN262144: INFO: Test for 1132132^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 14:48:03 EDT] GFN262144: INFO: Test for 1132142^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 14:48:04 EDT] GFN262144: INFO: Test for 1132144^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 14:48:04 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 14:48:04 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 14:48:05 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 15:00:54 EDT] GFN262144: 1134112^262144+1 is not prime. Residue roundofferr
[2014-06-18 16:00:39 EDT] GFN262144: 1134118^262144+1 is not prime. Residue roundofferr
[2014-06-18 17:01:26 EDT] GFN262144: 1134120^262144+1 is not prime. Residue roundofferr
[2014-06-18 17:19:50 EDT] GFN262144: 1134122^262144+1 is not prime. Residue roundofferr
[2014-06-18 17:19:50 EDT] Total Time: 16:58:09 Total Work Units: 20 Special Results Found: 0
[2014-06-18 17:19:51 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 17:19:51 EDT] GFN262144: INFO: Test for 1134112^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 17:19:51 EDT] GFN262144: INFO: Test for 1134118^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 17:19:51 EDT] GFN262144: INFO: Test for 1134120^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 17:19:51 EDT] GFN262144: INFO: Test for 1134122^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 17:19:52 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 17:19:52 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 17:19:53 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 17:34:58 EDT] GFN262144: 1136490^262144+1 is not prime. Residue roundofferr
[2014-06-18 18:01:11 EDT] GFN262144: 1136496^262144+1 is not prime. Residue roundofferr
[2014-06-18 18:19:44 EDT] GFN262144: 1136502^262144+1 is not prime. Residue roundofferr
[2014-06-18 18:25:59 EDT] GFN262144: 1136526^262144+1 is not prime. Residue roundofferr
[2014-06-18 18:25:59 EDT] Total Time: 18:04:18 Total Work Units: 24 Special Results Found: 0
[2014-06-18 18:25:59 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 18:26:00 EDT] GFN262144: INFO: Test for 1136490^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 18:26:00 EDT] GFN262144: INFO: Test for 1136496^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 18:26:00 EDT] GFN262144: INFO: Test for 1136502^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 18:26:00 EDT] GFN262144: INFO: Test for 1136526^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 18:26:01 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 18:26:01 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 18:26:02 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 19:07:26 EDT] GFN262144: 1137536^262144+1 is not prime. Residue roundofferr
[2014-06-18 19:08:02 EDT] GFN262144: 1137540^262144+1 is not prime. Residue roundofferr
[2014-06-18 19:36:46 EDT] GFN262144: 1137542^262144+1 is not prime. Residue roundofferr
[2014-06-18 19:47:32 EDT] GFN262144: 1137548^262144+1 is not prime. Residue roundofferr
[2014-06-18 19:47:32 EDT] Total Time: 19:25:51 Total Work Units: 28 Special Results Found: 0
[2014-06-18 19:47:32 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 19:47:32 EDT] GFN262144: INFO: Test for 1137536^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 19:47:33 EDT] GFN262144: INFO: Test for 1137540^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 19:47:33 EDT] GFN262144: INFO: Test for 1137542^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 19:47:33 EDT] GFN262144: INFO: Test for 1137548^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 19:47:33 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 19:47:33 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 19:47:34 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 20:25:07 EDT] GFN262144: 1138640^262144+1 is not prime. Residue roundofferr
[2014-06-18 20:52:25 EDT] GFN262144: 1138644^262144+1 is not prime. Residue roundofferr
[2014-06-18 21:53:09 EDT] GFN262144: 1138648^262144+1 is not prime. Residue roundofferr
[2014-06-18 22:21:39 EDT] GFN262144: 1138658^262144+1 is not prime. Residue roundofferr
[2014-06-18 22:21:39 EDT] Total Time: 21:59:58 Total Work Units: 32 Special Results Found: 0
[2014-06-18 22:21:39 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-18 22:21:40 EDT] GFN262144: INFO: Test for 1138640^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 22:21:40 EDT] GFN262144: INFO: Test for 1138644^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 22:21:40 EDT] GFN262144: INFO: Test for 1138648^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 22:21:40 EDT] GFN262144: INFO: Test for 1138658^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-18 22:21:40 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-18 22:21:41 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-18 22:21:42 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-18 23:12:47 EDT] GFN262144: No data in file [genefer.log]. Is genefer broken?
[2014-06-18 23:21:30 EDT] PRPNet Client application v5.3.1 started
[2014-06-18 23:21:30 EDT] User name Dingo at email address is boinc@dingo-den.com
[2014-06-18 23:59:59 EDT] GFN262144: 1141252^262144+1 is not prime. Residue 10379dbf1a8b92ba
[2014-06-19 00:14:05 EDT] GFN262144: 1141258^262144+1 is not prime. Residue roundofferr
[2014-06-19 00:34:52 EDT] GFN262144: 1141264^262144+1 is not prime. Residue roundofferr
[2014-06-19 00:48:39 EDT] GFN262144: 1141266^262144+1 is not prime. Residue roundofferr
[2014-06-19 00:48:39 EDT] Total Time: 1:27:09 Total Work Units: 4 Special Results Found: 0
[2014-06-19 00:48:39 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 00:48:40 EDT] GFN262144: INFO: Test for 1141252^262144+1 was accepted
[2014-06-19 00:48:40 EDT] GFN262144: INFO: Test for 1141258^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 00:48:40 EDT] GFN262144: INFO: Test for 1141264^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 00:48:40 EDT] GFN262144: INFO: Test for 1141266^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 00:48:40 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 00:48:40 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 00:48:42 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 00:53:44 EDT] GFN262144: 1143732^262144+1 is not prime. Residue roundofferr
[2014-06-19 01:05:24 EDT] GFN262144: 1143734^262144+1 is not prime. Residue roundofferr
[2014-06-19 01:07:07 EDT] GFN262144: 1143736^262144+1 is not prime. Residue roundofferr
[2014-06-19 01:22:03 EDT] GFN262144: 1143758^262144+1 is not prime. Residue roundofferr
[2014-06-19 01:22:03 EDT] Total Time: 2:00:33 Total Work Units: 8 Special Results Found: 0
[2014-06-19 01:22:03 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 01:22:03 EDT] GFN262144: INFO: Test for 1143732^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 01:22:03 EDT] GFN262144: INFO: Test for 1143734^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 01:22:04 EDT] GFN262144: INFO: Test for 1143736^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 01:22:04 EDT] GFN262144: INFO: Test for 1143758^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 01:22:04 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 01:22:04 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 01:22:05 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 01:32:37 EDT] GFN262144: 1144366^262144+1 is not prime. Residue roundofferr
[2014-06-19 02:00:05 EDT] GFN262144: 1144382^262144+1 is not prime. Residue roundofferr
[2014-06-19 02:07:29 EDT] GFN262144: 1144386^262144+1 is not prime. Residue roundofferr
[2014-06-19 02:13:46 EDT] GFN262144: 1144388^262144+1 is not prime. Residue roundofferr
[2014-06-19 02:13:46 EDT] Total Time: 2:52:16 Total Work Units: 12 Special Results Found: 0
[2014-06-19 02:13:46 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 02:13:47 EDT] GFN262144: INFO: Test for 1144366^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 02:13:47 EDT] GFN262144: INFO: Test for 1144382^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 02:13:47 EDT] GFN262144: INFO: Test for 1144386^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 02:13:47 EDT] GFN262144: INFO: Test for 1144388^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 02:13:47 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 02:13:47 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 02:13:49 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 02:32:38 EDT] GFN262144: 1145360^262144+1 is not prime. Residue roundofferr
[2014-06-19 03:03:19 EDT] GFN262144: 1145362^262144+1 is not prime. Residue roundofferr
[2014-06-19 03:28:24 EDT] GFN262144: 1145366^262144+1 is not prime. Residue roundofferr
[2014-06-19 04:13:25 EDT] GFN262144: 1145374^262144+1 is not prime. Residue roundofferr
[2014-06-19 04:13:25 EDT] Total Time: 4:51:55 Total Work Units: 16 Special Results Found: 0
[2014-06-19 04:13:25 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 04:13:25 EDT] GFN262144: INFO: Test for 1145360^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 04:13:26 EDT] GFN262144: INFO: Test for 1145362^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 04:13:26 EDT] GFN262144: INFO: Test for 1145366^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 04:13:26 EDT] GFN262144: INFO: Test for 1145374^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 04:13:26 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 04:13:26 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 04:13:28 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 04:18:30 EDT] GFN262144: 1147478^262144+1 is not prime. Residue roundofferr
[2014-06-19 04:21:21 EDT] GFN262144: 1147488^262144+1 is not prime. Residue roundofferr
[2014-06-19 04:30:47 EDT] GFN262144: 1147496^262144+1 is not prime. Residue roundofferr
[2014-06-19 05:17:39 EDT] GFN262144: 1147504^262144+1 is not prime. Residue roundofferr
[2014-06-19 05:17:39 EDT] Total Time: 5:56:09 Total Work Units: 20 Special Results Found: 0
[2014-06-19 05:17:39 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 05:17:39 EDT] GFN262144: INFO: Test for 1147478^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:17:40 EDT] GFN262144: INFO: Test for 1147488^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:17:40 EDT] GFN262144: INFO: Test for 1147496^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:17:40 EDT] GFN262144: INFO: Test for 1147504^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:17:40 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 05:17:40 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 05:17:41 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 05:19:26 EDT] GFN262144: 1148916^262144+1 is not prime. Residue roundofferr
[2014-06-19 05:38:48 EDT] GFN262144: 1148926^262144+1 is not prime. Residue roundofferr
[2014-06-19 05:46:04 EDT] GFN262144: 1148932^262144+1 is not prime. Residue roundofferr
[2014-06-19 05:50:00 EDT] GFN262144: 1148938^262144+1 is not prime. Residue roundofferr
[2014-06-19 05:50:00 EDT] Total Time: 6:28:30 Total Work Units: 24 Special Results Found: 0
[2014-06-19 05:50:00 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 05:50:01 EDT] GFN262144: INFO: Test for 1148916^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:50:01 EDT] GFN262144: INFO: Test for 1148926^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:50:01 EDT] GFN262144: INFO: Test for 1148932^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:50:01 EDT] GFN262144: INFO: Test for 1148938^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 05:50:01 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 05:50:01 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 05:50:03 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 05:51:47 EDT] GFN262144: 1149550^262144+1 is not prime. Residue roundofferr
[2014-06-19 07:11:35 EDT] GFN262144: 1149556^262144+1 is not prime. Residue roundofferr
[2014-06-19 07:12:14 EDT] GFN262144: 1149558^262144+1 is not prime. Residue roundofferr
[2014-06-19 07:27:13 EDT] GFN262144: 1149562^262144+1 is not prime. Residue roundofferr
[2014-06-19 07:27:13 EDT] Total Time: 8:05:43 Total Work Units: 28 Special Results Found: 0
[2014-06-19 07:27:14 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 07:27:14 EDT] GFN262144: INFO: Test for 1149550^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 07:27:14 EDT] GFN262144: INFO: Test for 1149556^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 07:27:14 EDT] GFN262144: INFO: Test for 1149558^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 07:27:15 EDT] GFN262144: INFO: Test for 1149562^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 07:27:15 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 07:27:15 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 07:27:16 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 08:25:12 EDT] GFN262144: 1151472^262144+1 is not prime. Residue roundofferr
[2014-06-19 08:44:44 EDT] GFN262144: 1151482^262144+1 is not prime. Residue roundofferr
[2014-06-19 09:03:01 EDT] GFN262144: 1151490^262144+1 is not prime. Residue roundofferr
[2014-06-19 09:05:53 EDT] GFN262144: 1151492^262144+1 is not prime. Residue roundofferr
[2014-06-19 09:05:53 EDT] Total Time: 9:44:23 Total Work Units: 32 Special Results Found: 0
[2014-06-19 09:05:53 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 09:05:53 EDT] GFN262144: INFO: Test for 1151472^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 09:05:53 EDT] GFN262144: INFO: Test for 1151482^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 09:05:54 EDT] GFN262144: INFO: Test for 1151490^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 09:05:54 EDT] GFN262144: INFO: Test for 1151492^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 09:05:54 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 09:05:54 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 09:05:55 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 09:31:53 EDT] GFN262144: 1153730^262144+1 is not prime. Residue roundofferr
[2014-06-19 09:48:00 EDT] GFN262144: 1153732^262144+1 is not prime. Residue roundofferr
[2014-06-19 10:00:49 EDT] GFN262144: 1153734^262144+1 is not prime. Residue roundofferr
[2014-06-19 10:06:59 EDT] GFN262144: 1153736^262144+1 is not prime. Residue roundofferr
[2014-06-19 10:06:59 EDT] Total Time: 10:45:29 Total Work Units: 36 Special Results Found: 0
[2014-06-19 10:06:59 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 10:07:00 EDT] GFN262144: INFO: Test for 1153730^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 10:07:00 EDT] GFN262144: INFO: Test for 1153732^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 10:07:00 EDT] GFN262144: INFO: Test for 1153734^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 10:07:00 EDT] GFN262144: INFO: Test for 1153736^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 10:07:00 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 10:07:00 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 10:07:02 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 10:20:57 EDT] GFN262144: 1155330^262144+1 is not prime. Residue roundofferr
[2014-06-19 10:50:17 EDT] GFN262144: 1155336^262144+1 is not prime. Residue roundofferr
[2014-06-19 11:04:12 EDT] GFN262144: 1155338^262144+1 is not prime. Residue roundofferr
[2014-06-19 11:09:21 EDT] GFN262144: 1155342^262144+1 is not prime. Residue roundofferr
[2014-06-19 11:09:21 EDT] Total Time: 11:47:51 Total Work Units: 40 Special Results Found: 0
[2014-06-19 11:09:25 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 11:09:26 EDT] GFN262144: INFO: Test for 1155330^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 11:09:26 EDT] GFN262144: INFO: Test for 1155336^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 11:09:27 EDT] GFN262144: INFO: Test for 1155338^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 11:09:28 EDT] GFN262144: INFO: Test for 1155342^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 11:09:29 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 11:09:30 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 11:09:35 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 11:32:28 EDT] GFN262144: 1157088^262144+1 is not prime. Residue roundofferr
[2014-06-19 11:50:47 EDT] GFN262144: 1157092^262144+1 is not prime. Residue roundofferr
[2014-06-19 11:56:59 EDT] GFN262144: 1157096^262144+1 is not prime. Residue roundofferr
[2014-06-19 12:15:24 EDT] GFN262144: 1157098^262144+1 is not prime. Residue roundofferr
[2014-06-19 12:15:24 EDT] Total Time: 12:53:54 Total Work Units: 44 Special Results Found: 0
[2014-06-19 12:15:24 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 12:15:25 EDT] GFN262144: INFO: Test for 1157088^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 12:15:25 EDT] GFN262144: INFO: Test for 1157092^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 12:15:25 EDT] GFN262144: INFO: Test for 1157096^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 12:15:25 EDT] GFN262144: INFO: Test for 1157098^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 12:15:25 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 12:15:26 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 12:15:27 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 12:30:47 EDT] GFN262144: 1158588^262144+1 is not prime. Residue roundofferr
[2014-06-19 12:34:55 EDT] GFN262144: 1158590^262144+1 is not prime. Residue roundofferr
[2014-06-19 12:58:21 EDT] GFN262144: 1158594^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:00:12 EDT] GFN262144: 1158598^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:00:12 EDT] Total Time: 13:38:42 Total Work Units: 48 Special Results Found: 0
[2014-06-19 13:00:12 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 13:00:12 EDT] GFN262144: INFO: Test for 1158588^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:00:13 EDT] GFN262144: INFO: Test for 1158590^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:00:13 EDT] GFN262144: INFO: Test for 1158594^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:00:13 EDT] GFN262144: INFO: Test for 1158598^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:00:13 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 13:00:13 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 13:00:14 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 13:07:48 EDT] GFN262144: 1159946^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:19:59 EDT] GFN262144: 1159952^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:21:48 EDT] GFN262144: 1159954^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:32:34 EDT] GFN262144: 1159960^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:32:34 EDT] Total Time: 14:11:04 Total Work Units: 52 Special Results Found: 0
[2014-06-19 13:32:34 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 13:32:34 EDT] GFN262144: INFO: Test for 1159946^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:32:34 EDT] GFN262144: INFO: Test for 1159952^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:32:34 EDT] GFN262144: INFO: Test for 1159954^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:32:35 EDT] GFN262144: INFO: Test for 1159960^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 13:32:35 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 13:32:35 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 13:32:36 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 13:37:49 EDT] GFN262144: 1161004^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:53:10 EDT] GFN262144: 1161006^262144+1 is not prime. Residue roundofferr
[2014-06-19 13:53:53 EDT] GFN262144: 1161010^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:00:11 EDT] GFN262144: 1161012^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:00:11 EDT] Total Time: 14:38:41 Total Work Units: 56 Special Results Found: 0
[2014-06-19 14:00:12 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 14:00:12 EDT] GFN262144: INFO: Test for 1161004^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:00:12 EDT] GFN262144: INFO: Test for 1161006^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:00:12 EDT] GFN262144: INFO: Test for 1161010^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:00:13 EDT] GFN262144: INFO: Test for 1161012^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:00:13 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 14:00:13 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 14:00:14 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 14:00:57 EDT] GFN262144: 1161890^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:02:47 EDT] GFN262144: 1161894^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:19:07 EDT] GFN262144: 1161896^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:19:50 EDT] GFN262144: 1161900^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:19:50 EDT] Total Time: 14:58:20 Total Work Units: 60 Special Results Found: 0
[2014-06-19 14:19:51 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 14:19:51 EDT] GFN262144: INFO: Test for 1161890^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:19:51 EDT] GFN262144: INFO: Test for 1161894^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:19:51 EDT] GFN262144: INFO: Test for 1161896^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:19:52 EDT] GFN262144: INFO: Test for 1161900^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:19:52 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 14:19:52 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 14:19:53 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 14:29:32 EDT] GFN262144: 1162394^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:31:22 EDT] GFN262144: 1162396^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:36:33 EDT] GFN262144: 1162398^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:38:23 EDT] GFN262144: 1162412^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:38:23 EDT] Total Time: 15:16:53 Total Work Units: 64 Special Results Found: 0
[2014-06-19 14:38:24 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 14:38:25 EDT] GFN262144: INFO: Test for 1162394^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:38:25 EDT] GFN262144: INFO: Test for 1162396^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:38:25 EDT] GFN262144: INFO: Test for 1162398^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:38:25 EDT] GFN262144: INFO: Test for 1162412^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:38:26 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 14:38:26 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 14:38:27 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 14:42:31 EDT] GFN262144: 1163004^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:47:41 EDT] GFN262144: 1163008^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:50:38 EDT] GFN262144: 1163012^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:51:22 EDT] GFN262144: 1163014^262144+1 is not prime. Residue roundofferr
[2014-06-19 14:51:22 EDT] Total Time: 15:29:52 Total Work Units: 68 Special Results Found: 0
[2014-06-19 14:51:22 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 14:51:23 EDT] GFN262144: INFO: Test for 1163004^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:51:23 EDT] GFN262144: INFO: Test for 1163008^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:51:23 EDT] GFN262144: INFO: Test for 1163012^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:51:23 EDT] GFN262144: INFO: Test for 1163014^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 14:51:24 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 14:51:24 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 14:51:25 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 14:57:43 EDT] GFN262144: 1163470^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:10:44 EDT] GFN262144: 1163490^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:17:07 EDT] GFN262144: 1163492^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:24:33 EDT] GFN262144: 1163494^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:24:33 EDT] Total Time: 16:03:03 Total Work Units: 72 Special Results Found: 0
[2014-06-19 15:24:33 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 15:24:33 EDT] GFN262144: INFO: Test for 1163470^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:24:34 EDT] GFN262144: INFO: Test for 1163490^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:24:34 EDT] GFN262144: INFO: Test for 1163492^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:24:34 EDT] GFN262144: INFO: Test for 1163494^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:24:34 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 15:24:34 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 15:24:36 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 15:45:24 EDT] GFN262144: 1164742^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:46:08 EDT] GFN262144: 1164746^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:46:51 EDT] GFN262144: 1164748^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:55:26 EDT] GFN262144: 1164750^262144+1 is not prime. Residue roundofferr
[2014-06-19 15:55:26 EDT] Total Time: 16:33:56 Total Work Units: 76 Special Results Found: 0
[2014-06-19 15:55:26 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 15:55:26 EDT] GFN262144: INFO: Test for 1164742^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:55:26 EDT] GFN262144: INFO: Test for 1164746^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:55:27 EDT] GFN262144: INFO: Test for 1164748^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:55:27 EDT] GFN262144: INFO: Test for 1164750^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 15:55:27 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 15:55:27 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 15:55:29 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 15:57:21 EDT] GFN262144: 1165944^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:05:57 EDT] GFN262144: 1165948^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:14:36 EDT] GFN262144: 1165954^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:22:00 EDT] GFN262144: 1165958^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:22:00 EDT] Total Time: 17:00:30 Total Work Units: 80 Special Results Found: 0
[2014-06-19 16:22:00 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 16:22:02 EDT] GFN262144: INFO: Test for 1165944^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:22:02 EDT] GFN262144: INFO: Test for 1165948^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:22:03 EDT] GFN262144: INFO: Test for 1165954^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:22:03 EDT] GFN262144: INFO: Test for 1165958^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:22:03 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 16:22:03 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 16:22:04 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 16:22:50 EDT] GFN262144: 1167186^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:24:43 EDT] GFN262144: 1167188^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:29:58 EDT] GFN262144: 1167194^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:36:26 EDT] GFN262144: 1167208^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:36:26 EDT] Total Time: 17:14:56 Total Work Units: 84 Special Results Found: 0
[2014-06-19 16:36:26 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 16:36:27 EDT] GFN262144: INFO: Test for 1167186^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:36:27 EDT] GFN262144: INFO: Test for 1167188^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:36:27 EDT] GFN262144: INFO: Test for 1167194^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:36:27 EDT] GFN262144: INFO: Test for 1167208^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 16:36:27 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 16:36:27 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 16:36:29 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 16:50:43 EDT] GFN262144: 1167778^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:58:17 EDT] GFN262144: 1167782^262144+1 is not prime. Residue roundofferr
[2014-06-19 16:59:03 EDT] GFN262144: 1167784^262144+1 is not prime. Residue roundofferr
[2014-06-19 17:03:12 EDT] GFN262144: 1167788^262144+1 is not prime. Residue roundofferr
[2014-06-19 17:03:12 EDT] Total Time: 17:41:42 Total Work Units: 88 Special Results Found: 0
[2014-06-19 17:03:12 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 17:03:13 EDT] GFN262144: INFO: Test for 1167778^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:03:13 EDT] GFN262144: INFO: Test for 1167782^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:03:13 EDT] GFN262144: INFO: Test for 1167784^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:03:13 EDT] GFN262144: INFO: Test for 1167788^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:03:13 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 17:03:14 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 17:03:15 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 17:08:30 EDT] GFN262144: 1169100^262144+1 is not prime. Residue roundofferr
[2014-06-19 17:10:23 EDT] GFN262144: 1169104^262144+1 is not prime. Residue roundofferr
[2014-06-19 17:14:31 EDT] GFN262144: 1169106^262144+1 is not prime. Residue roundofferr
[2014-06-19 17:19:42 EDT] GFN262144: 1169108^262144+1 is not prime. Residue roundofferr
[2014-06-19 17:19:42 EDT] Total Time: 17:58:12 Total Work Units: 92 Special Results Found: 0
[2014-06-19 17:19:42 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-19 17:19:42 EDT] GFN262144: INFO: Test for 1169100^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:19:42 EDT] GFN262144: INFO: Test for 1169104^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:19:42 EDT] GFN262144: INFO: Test for 1169106^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:19:43 EDT] GFN262144: INFO: Test for 1169108^262144+1 was ignored. Your application and/or prpclient is obsolete and MUST be upgraded
[2014-06-19 17:19:43 EDT] GFN262144: INFO: All 4 test results were accepted
[2014-06-19 17:19:43 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-19 17:19:44 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-19 17:22:44 EDT] GFN262144: 1169992^262144+1 is not prime. Residue roundofferr
Looking at my CPU work and it has switched over to version 5.3.0 as well.
[2014-06-15 01:28:03 EDT] GFN262144: No data in file [genefer.log]. Is genefer broken?
[2014-06-15 01:31:53 EDT] PRPNet Client application v5.3.1 started
[2014-06-15 01:31:53 EDT] User name Dingo at email address is boinc@dingo-den.com
[2014-06-15 01:58:13 EDT] GFN262144: 1081156^262144+1 is not prime. Residue fbca385a391d1df3
[2014-06-15 01:58:13 EDT] Total Time: 0:26:22 Total Work Units: 1 Special Results Found: 0
[2014-06-15 01:58:13 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-15 01:58:13 EDT] GFN262144: INFO: Test for 1081152^262144+1 was accepted
[2014-06-15 01:58:13 EDT] GFN262144: INFO: Test for 1081156^262144+1 was accepted
[2014-06-15 01:58:13 EDT] GFN262144: INFO: All 2 test results were accepted
[2014-06-15 01:58:14 EDT] GFN262144: Getting work from server prpnet.primegrid.com at port 11002
[2014-06-15 01:58:15 EDT] GFN262144: PRPNet server is version 5.3.0
[2014-06-15 05:16:09 EDT] GFN262144: 1084152^262144+1 is not prime. Residue 6034ba1d3ae0d68d
[2014-06-15 08:28:27 EDT] GFN262144: 1084170^262144+1 is not prime. Residue 05b7bce7e36a1720
[2014-06-15 08:28:27 EDT] Total Time: 6:56:36 Total Work Units: 3 Special Results Found: 0
[2014-06-15 08:28:27 EDT] GFN262144: Returning work to server prpnet.primegrid.com at port 11002
[2014-06-15 08:28:27 EDT] GFN262144: INFO: Test for 1084152^262144+1 was accepted
[2014-06-15 08:28:28 EDT] GFN262144: INFO: Test for 1084170^262144+1 was accepted
[2014-06-15 08:28:28 EDT] GFN262144: INFO: All 2 test results were accepted
____________
Proud Founder of
Have a look at my WebCam
My best Prime 46776558131072+1 |
|
|
|
|
|
Hi Dingo,
See this post
The server is correctly ignoring the tasks with the round-off errors. THe message about the client/application being obsolete is incorrect but you can just ignore it.
Cheers
- Iain
____________
Twitter: IainBethune
Proud member of team "Aggie The Pew". Go Aggie!
3073428256125*2^1290000-1 is Prime! |
|
|
|
|
|
But in my post below the log shows that it switched from 5.3.1 to 5.3.0 ???
So there is no fix for this just stop using the GPU ?
____________
Proud Founder of
Have a look at my WebCam
My best Prime 46776558131072+1 |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
I am getting this error on my work units "Your application and/or prpclient is obsolete and MUST be upgraded" Does that mean that I am doing them for no reason and they are being aborted? Just noticed it in the log.
There is an problem in the code and when your client gets this rounding error and goes to abort the test and report to the server the server is rejecting the aborted test because the client is reporting the wrong software version. Will be fixed in the next software version. Just means that aborted tests are not aborted properly and the number of outstanding tests on the server is growing and growing as we've now reached a level where next to no GPU work can succeed, as it gets this rounding error.
This is on a GPU and I am using geneferexe=geneferocl.exe which as you can see in the log worked fine for a long time.
This is the same as what everyone else is seeing. Now is the time to stop using GPUs on this port.
It is a GTX 750Ti with the latest drivers for that card.
Your drivers are fine, we've reached the testing value limit of what this application is capable of for GPUs. I am still running my CPU on this port.
At the start of the log it started using 5.3.1 and then switched to 5.3.0 for some reason?
The client is version 5.3.1, the server is version 5.3.0. A new feature is that the client version must be greater or equal to the server version or the server will not accept anything the client reports. |
|
|
Michael GoetzVolunteer moderator
Project administrator
Send message
Joined: 21 Jan 10
Posts: 13513
ID: 53948
Credit: 237,712,514
RAC: 0
|
A new feature is that the client version must be greater or equal to the server version or the server will not accept anything the client reports.
That is incorrect. There's specific versions that are required, but there's no general requirement for the client software to be newer than the server version.
____________
My lucky number is 75898524288+1 |
|
|
|
|
|
OK thanks for the replies. I have changed over to MEGA Prime to see how that goes.
Cheers
____________
Proud Founder of
Have a look at my WebCam
My best Prime 46776558131072+1 |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
I tried startoption=4 and uncommenting geneferexe=geneferocl.exe and geneferexe=genefer64.exe and it seems to successfully start on the GPU then switch to the CPU once it gets the roundoff error. This may provide a speed up to CPU tasks. |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
All WUs on the server are now "in progress". We have to wait for "in progress" WUs to go back to the unassigned pool. There are 170 WUs due to expire before the end of the challenge. |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
Well done everyone! We've actually used up all the GPU tasks! Participation in this challenge has been fantastic. We've gone across a "B" transition, a milestone for this sub-project.
The challenge will continue for another 2 days for the hardcore to fight over the 170 WUs that will expire and go back to the untested pool. In about a week all the abandoned WUs will expire and this port will have more CPU work available as normal.
If you want to enhance your chance of finding a GFN prime I suggest you join me in moving your CPU over to the GFN32768 port and your GPU over to the GFN524288 port.
May the odds be ever in your favour.
____________
|
|
|
|
|
Well done everyone! We've actually used up all the GPU tasks! Participation in this challenge has been fantastic. We've gone across a "B" transition, a milestone for this sub-project.
The challenge will continue for another 2 days for the hardcore to fight over the 170 WUs that will expire and go back to the untested pool. In about a week all the abandoned WUs will expire and this port will have more CPU work available as normal.
If you want to enhance your chance of finding a GFN prime I suggest you join me in moving your CPU over to the GFN32768 port and your GPU over to the GFN524288 port.
May the odds be ever in your favour.
Yeah, I run on CPU, not GPU, but there are still no tasks.
Right now the server has no work units to hand out. My PRPNet clients moved on to another port/project that had 0 percent, 0 WUs in my .ini file. If I understand Pending Tests correctly, the next chance to get work on port 11002 is at 14:32 UT where two work units might expire.
/JeppeSN |
|
|
|
|
|
Because my setting change was late, Many WUs are reserved and affect the challenge.
I'm sorry to have kept other participants waiting. |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
Because my setting change was late, Many WUs are reserved and affect the challenge.
I'm sorry to have kept other participants waiting.
Its alright zunewantan. Everyone would have had to detached their GPUs at the same time. Its not reasonable to expect a smooth move to CPUs. Lets be happy with the milestone of GPUs finishing on this port. |
|
|
RogerVolunteer developer
Volunteer tester
Send message
Joined: 27 Nov 11
Posts: 1137
ID: 120786
Credit: 267,535,355
RAC: 0
|
|
Stats are final. Congratulation to zunewantan and SETI.Germany.
The top of the challenge rankings is as follows:
rank userid tests score
1 zunewantan 1,942 48,880,780
2 DeleteNull 1,622 40,806,002
3 Ross* 1,441 36,222,226
rank teamid tests score
1 SETI.Germany 3,249 81,685,778
2 Aggie_The_Pew 2,691 67,660,133
3 Sicituradastra. 1,780 44,739,324
We did a total of 13,046 tests. That gave us a:
22.82% chance of finding one prime; and
3.56% chance of finding two primes; and
0.37% chance of finding three primes.
So we would have expected 0.3105 GF primes, on average.
Unfortunately no primes were found.
See you at the next challenge! |
|
|
Sysadm@NbgVolunteer moderator
Volunteer tester
Project scientist
Send message
Joined: 5 Feb 08
Posts: 1188
ID: 18646
Credit: 490,016,651
RAC: 0
|
|
Sorry for being late, but I spent some days at the coast (f.k.a. beach but it was stormy weather)
Stats are saved here and will be available with the other link until the next challenge preparations
thanks for your effort
____________
Sysadm@Nbg
my current lucky number: 3749*2^1555697+1
PSA-PRPNet-Stats-URL: http://u-g-f.de/PRPNet/
|
|
|
|
|
|
Hey that's OK hope you had "fun in the sun" (or lack thereof!)
Next year we should do a GFN 524288 challenge. Keep those GPUs crankin'!
(edit: hmmm... if it lasts that long... we appear to be at about 805000 leading edge for "k" and the theorized limit is about 840000 for OCL.)
Thanks all for the challenge. I kind of petered out toward the end when we switched to CPU but it was still a fine amount of work done overall.
--Gary
____________
"I am he as you are he as you are me and we are all together"
87*2^3496188+1 is prime! (1052460 digits)
4 is not prime! (1 digit) |
|
|
